Using Bar XY Cartesian Coordinates
Over the last few years it has become standard practice for bike manufacturers to provide Reach and Stack figures in their geometry charts. As shown below, these metrics give the coordinates of the top of the Head Tube relative to the Bottom Bracket. ...
Setting up the fit area
The camera should be positioned 150cm-190cm from the bike (roughly 5-7 feet) with the lens at a height of 95cm. Relative to the bike the camera should be pointing at the approximate midpoint between bars and saddle. If the rider tends to turn their ...
Hardware Compatibility Guide
This guide will help you ensure that your Windows computer is up to the task of running our Velogic Studio and 3D Aero products. Basic system requirements Velogic Studio and 3D Aero are carrying out detailed analysis of color and depth frames at ...
Velogic Studio bike measurements defined
Our Velogic Studio system collects a detailed set of bike measurements that combine both traditional relationships and modern XY metrics. Bike measurements as shown in Velogic Studio The definitions for these measurements are listed below. Saddle ...
If you would like to find bikes to suit a person’s body (rather than based on known bike measurements), choose “Body” in Step 1: Choosing to measure body When you click on a measurement field the display pane will show instructions for taking the ...