Section 04: Aero
Sustainability Test
The Sustainability Test function was introduced with the Aero module of Velogic Studio, but doesn't require a frontal camera to run; you can use it just with lateral cameras too. The Sustainability Test function is simply "auto-capture on a timer". ...
Deep Dive: Frontal Progression
Frontal Progression helps you show your customer how their frontal area has changed during the fit. It shows a series of images, side by side, showing how the frontal area of each capture compares with the final capture. How to invoke Frontal ...
How to use Aero in Velogic Studio
You will need: An Orbbec Femto Mega camera, to be placed in the front of the rider. This might be your 3rd Femto Mega camera if you already have 2 for bilateral capture. A network cable connecting the camera to the PoE Network Switch (assuming you ...
What you can (and can't) do with Aero in Velogic Studio
"All models are wrong, but some are useful". Please do not rely on the analysis provided by the Aero module without verifying via other means, e.g a wind tunnel or real-world measurement. This page outlines the limitations of Velogic Studio's Aero ...
Aero basics
At higher cycling speeds, a significant portion of a rider's power is expended in overcoming aerodynamic drag (Martin et al. 1998). As speed increases, wind resistance grows exponentially, meaning a small increase in speed requires disproportionately ...