> For the complete documentation index, see [llms.txt](https://docs.velogicfit.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.velogicfit.com/section-01-getting-started/v41-whats-new.md).

# Velogic Studio v4.1: What's new

Saddle pressure with gebioMized, Bluetooth sensors, a long list of speed and reliability fixes, and Velogic Studio on the Mac.

For most of the past year we've been rebuilding Velogic Studio on new foundations. On the surface it still looks and works like the Velogic Studio you know, but underneath it is faster, more reliable, and ready for a few things the old version couldn't do.

Velogic Studio v4.1 is the first release built on those foundations. The headlines are:

* **Saddle pressure**, with live and recorded data from a gebioMized pressure mat
* **Bluetooth sensors** for heart rate, power and cadence
* **Faster and more reliable** across cameras, capture, review and reports, with over 500 bug fixes and performance improvements
* **Velogic Studio on the Mac**

v4.1 is a free update for all Velogic Studio v4 subscribers. It installs over your current version, uses the same licence, and opens all your existing fit sessions.

## Saddle pressure with gebioMized

Velogic Studio now connects directly to a **gebioMized saddle pressure mat** and puts pressure data alongside your motion capture. There's no separate gebioMized software to run and no extra dongle to plug in: the mat talks to Velogic Studio over Bluetooth.

![Live saddle pressure map in Velogic Studio beside a rear webcam view of the rider on the bike](https://11145950-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FjxwtZYYk0lvusnMTywNR%2Fuploads%2Fgit-blob-31e72e85cb566352ff0d92123e33d505ea6d6271%2Fv41-whats-new-saddle-pressure.png?alt=media)

What you get:

* **A live pressure map** during the fit, with a centre-of-pressure trail. Switch between **Dynamic** and **Max** views, or pop the view out into its own window.
* **Pressure recorded with every capture.** When you review a capture, the pressure replays in step with the videos.
* **Pressure in stroke mode.** In Stroke Analysis, pressure is shown for a single real pedal stroke at the mat's full 200 samples per second, lined up with the lateral and frontal stroke videos.
* **Saddle pressure metrics** saved with the fit, in their own **Saddle Pressure** group in the Motion Metriqs panel:
  * CoP lateral travel
  * CoP distance from the front (tip) of the saddle
  * Max pressure, left and right
  * Max pressure, front
* **Figures that match gebioMized's own software.** Pressures are in millibar and use gebioMized's own calibration, zones and centre-of-pressure calculation, so the picture and the numbers agree with what you'd see in GP Manager.
* **Before and after comparison**, side by side or overlaid, plus a crossfade video you can save to the fit folder and send to the rider.
* **Saddle pressure in the client report**: the pressure image, plus the pressure metrics with the same explanations as the rest of the Motion Metriqs.
* **Clear status on the mat card.** It tells you if the mat is connected but not sending data, which Bluetooth adapter is in use, and when the mat's licence expires.

### What you need

* **Velogic Studio Pro.** Saddle pressure is a Pro feature.
* A gebioMized mat with the **BLE transmitter** (the one with a USB-C port beside the mat port). The older WiFi and Ethernet transmitters won't work.
* An active **gebioMized system licence** for the mat. Licensing is handled by gebioMized: to check your mat is properly licensed, contact gebioMized with the mat's serial number. If you already have an active gebioMized system licence, there's no extra cost to use the mat with Velogic Studio. Velogic Studio checks the licence online and shows its expiry date on the mat card.
* A working **Bluetooth radio**. On Windows we recommend a USB Bluetooth adapter on a short extension cable, positioned near the bike. See [Bluetooth for Velogic Studio: choosing and positioning a USB adapter](https://docs.velogicfit.com/section-02-using-velogic-studio/bluetooth-adapter.md).

Setup takes a minute: switch the mat on, go to **Step 1: Configuration**, scroll to the **GEBIOMIZED** panel and click **ADD PRESSURE MAT**. The full guide is at [gebioMized saddle pressure mat integration](https://docs.velogicfit.com/section-02-using-velogic-studio/gebiomized-integration.md).

## Bluetooth heart rate, power and cadence

Velogic Studio can now read **Bluetooth Low Energy** sensors directly, as well as ANT+:

* **Heart rate** monitors
* **Power meters**, including left/right power balance
* **Cadence** sensors

Any sensor that uses the standard Bluetooth heart rate, cycling power or speed and cadence services will work, and that covers most current sensors from Garmin, Wahoo, Polar, Favero, 4iiii, Stages and SRAM/Quarq. Sensors are found automatically when Velogic Studio starts. You can pick which one to use for each type in the **BLUETOOTH** panel on Step 1.

During capture, the values show live in the Motion Metriqs panel and are saved with each capture:

![Bluetooth cadence, heart rate, power and power balance in the Motion Metriqs panel during capture](https://11145950-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FjxwtZYYk0lvusnMTywNR%2Fuploads%2Fgit-blob-23a6bc4d4eb56500241c812f077343264ae00bb8%2Fbluetooth-3.png?alt=media)

Bluetooth and ANT+ can be used at the same time. See [Bluetooth Overview](https://docs.velogicfit.com/section-02-using-velogic-studio/bluetooth-overview.md) for setup and troubleshooting.

On Windows, Velogic Studio also warns you if Windows is allowed to switch off your USB Bluetooth adapter to save power, which drops sensors and the pressure mat mid-session, and can change the setting for you. The warning appears on the **BLUETOOTH** and **GEBIOMIZED** panels.

### ANT+ is now off by default

To keep things stable for the many fitters who don't use it, **ANT+ is now turned off unless you turn it on**. If you use ANT+ sensors, turn it back on once in **Settings > Plugins**. See [ANT+ Overview & Troubleshooting](https://docs.velogicfit.com/section-02-using-velogic-studio/ant-plus-overview.md).

## Faster and more reliable

This is the part of the release we've put the most work into. It's hard to show in a screenshot, but you'll feel it.

### Speed

* **Quicker all round.** Startup, moving between steps, and the setup wizards are all faster, and the step-by-step screens no longer pause between pages.
* **Smoother video review.** Scrubbing and jumping through a capture is much faster, and scrolling through side-by-side comparisons no longer stutters.
* **No more waiting on OneDrive or iCloud.** Starting a new session, reopening a session and the final report step used to freeze for several seconds when your fit folder was in a cloud-synced folder. They don't any more, and reopening a large session no longer pauses while its images load.
* **Faster depth processing on Windows.** If your computer has a suitable graphics card, Velogic Studio now uses it to process depth data. Without one, processing is still around four times faster than before.
* **Much lower memory use.** With two Orbbec cameras connected, Velogic Studio typically uses several hundred megabytes less, and sessions with many captures in the Fit Log use less memory too.

### Cameras

* **Orbbec Femto Mega:** a network camera that stops sending pictures is now detected and restarted, rather than looking connected while showing nothing. It rides out a short pause on the computer without restarting the stream, and recovers on its own if its depth and colour pictures fall out of step. A USB camera that is unplugged and reconnected starts streaming again without restarting the app.
* **Webcams:** a webcam that starts but never sends a picture, or stops part way through a session, is restarted automatically, and you're told if it can't be recovered, with a link explaining why it happens and how to prevent it. Webcams that are unplugged and plugged back in come back on their own. See [Webcams: Overview, FAQ, troubleshooting](https://docs.velogicfit.com/section-02-using-velogic-studio/webcams-overview.md).
* **Kinect on Windows 11:** Velogic Studio now fixes the "connects, then disconnects every 12 seconds" problem automatically by turning off Windows audio enhancements on the Kinect microphone. See [Kinect camera: compatibility and troubleshooting](https://docs.velogicfit.com/section-01-getting-started/kinect-troubleshooting.md).
* **Clearer messages** when a camera or the pressure mat stops sending data, so you know which device and what to check.

### Capture, review and your fit data

* **The Marker Troubleshooter.** When marker detection stays poor during live capture, a card on the lateral camera view tells you which marker is the problem and what to do about it, for example *"Replace or re-attach the knee marker"*. You can also open it any time by clicking the **Detection** indicator. It uses an optional model (about 100 MB) that Velogic Studio offers to download the first time it's needed. See [Troubleshooting marker detection](https://docs.velogicfit.com/section-02-using-velogic-studio/troubleshooting-marker-detection.md).
* **Recordings you can rely on.** A capture can no longer get stuck in **Processing**: if something goes wrong, you're told and can capture again. If the computer's preferred video encoder fails to start, Velogic Studio switches to another one instead of losing the video, and recordings now keep the last frames before you stop.
* **Your session is safe if its folder goes offline.** If the folder holding a fit session disappears for a while, for example on a cloud drive, Velogic Studio tells you and saves again when the folder is back.
* **A backup is made every time you open a session.** If a session file is damaged, Velogic Studio tells you instead of opening part of it.
* Recordings are no longer wrongly reported as damaged. Videos kept online-only in OneDrive are recognised, and Velogic Studio asks you to download them.
* Saving the Fit Log spreadsheet while it's open in Excel now retries instead of failing.
* If you lose your internet connection briefly, sign-in retries on its own instead of showing an error.

### Privacy

* Crash reports, diagnostic logs and feedback no longer include client names, comments, file paths or your Windows user name.
* Velogic Studio asks before uploading anything to support that may contain client data.

### Around the app

* **A new Step 2 layout.** The Fit Log runs the full width of the screen, with group headings you can collapse with one click, and a single button slides it up over the cameras when you want more room, without squashing the camera views.
* **A menu bar**, with **Deep Dive** as a top-level menu.
* **Searchable Settings**, with a clearer layout.
* **Better drawing tools**: undo and redo, an arrow tool, handles to move and resize a drawing, and hold Shift to snap to 45°.
* **Easier Motion Metriqs setup**: drag metrics between groups and reorder whole groups, and a **Reset to app defaults** button sits next to Import and Export.
* **Report auto-save is its own setting** on Step 3, separate from the choice between Manual and Automatic report generation.
* **Send Feedback** (Ctrl+Shift+F) lets you crop the screenshot and attaches the logs we need automatically.
* **BikeFinder Online** now runs inside Velogic Studio, and its downloads are saved into the session folder.
* **Dutch** is a new language, and **French** is back, with metric names reviewed by a native speaker.
* Clearer explanations for several metrics, including knee flexion and knee extension.

### And over 500 bug fixes and performance improvements

Everything above sits on top of more than 500 individual bug fixes and performance improvements made since v4.0, many of them found and reported by our Labs testers.

## How to get v4.1

v4.1 is going to our **Insider** users first. After about a week, if all is well, it goes to everyone.

* **You don't need to do anything.** Velogic Studio updates itself: install the update when you're prompted, or it installs automatically next time you start the app.
* **Your fit sessions work in both versions.** v4.1 opens sessions saved by earlier versions, and the earlier version can open sessions saved in v4.1.
* **The Windows system requirements haven't changed.** See [PC System Requirements](https://docs.velogicfit.com/section-01-getting-started/pc-system-requirements.md).
* If you're on the Insider version and need to switch back to the main version for a fit, see [Velogic Studio - "Insider" version](https://docs.velogicfit.com/section-01-getting-started/insider-version.md), or contact us at <contact@velogicfit.com>.

## Oh, and one more thing...

![Velogic Studio running on a MacBook at Strategic Fitting](https://11145950-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FjxwtZYYk0lvusnMTywNR%2Fuploads%2Fgit-blob-ea481f5dc015bb931b49169f851dd26dceada9ce%2Fv41-whats-new-mac.jpg?alt=media)

**Velogic Studio now runs on the Mac.**

It's the same app, with the same fit sessions and the same licence. You can capture on a Windows PC in the studio and review the fit on your MacBook, or run the whole fit from a Mac.

On a Mac you can use:

* **Orbbec Femto Mega** cameras, connected over the network
* **Webcams**
* **gebioMized** saddle pressure mats and **Bluetooth** sensors, using the Mac's built-in Bluetooth
* **BikeFinder Online**, drawing tools, reports and everything else in the app

The Mac version needs an **Apple Silicon** Mac (M1 or later) running **macOS 12 Monterey or later**. Kinect cameras, Orbbec Femto Bolt cameras and ANT+ sensors need Windows. Kinect captures made on Windows can still be reviewed on a Mac.

[**Download Velogic Studio for Mac**](https://vlgc.io/install4mac), open the downloaded file and drag Velogic Studio into your Applications folder. Sign in with your usual Velogic account.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.velogicfit.com/section-01-getting-started/v41-whats-new.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
