Using frame comparison
Learn how to use Velogic's free Frame Comparison tool to compare bike geometry, specifications, and calculate Bar XY positions
Last updated
🌐 Language
English
Learn how to use Velogic's free Frame Comparison tool to compare bike geometry, specifications, and calculate Bar XY positions
Last updated
The free velogicfit Frame Comparison tool offers a quick, fully-user-controlled way of comparing two or more frames side by side.
You'll find frame geometry, images (if available) and frame specifications. If you've got a target Bar X & Y (e.g. from a pre-purchase bike fit), you can also investigate the effect of different stem length/angle and spacer combinations making it easy to order the correct parts and set the bike up correctly first time.
If you are not familiar with X & Y terminology for bikes please read our explanation.
The first step is to choose the bikes to compare. Simply type the make and/or model of the bike in the search bar:
... and select from the list. Repeat for the second frame, and as many as you like (within reason!)
Note: If the model you're looking for is not in our list, please drop us an email at [email protected]. If you can find a link to the geometry page for the model you're requesting, that will help us add the model faster.
Once you have selected the frames and chosen a frame size, you should see frame geometry for each:
At the bottom of the page you can also find Frame Specifications:
The Calculated Measures entry lets you know which values we've had to work out. If we've had to make assumptions for the frame geometry the figures may be a few millimetres off – especially if the Frame Reach and Stack were not provided by the manufacturer. If a frame you're interested in is marked as having a calculated Reach and Stack, feel free to put pressure on the Manufacturer to provide that information and thus facilitate accurate position calculations.
After choosing frame(s), the next step is to specify what sort of stem you're using on the frame. This allows Frame Comparison to calculate Bar XY for that combination of frame and stem. See our guide to using BarXY coordinates if you're not sure on the definition of Bar XY.
You can change the stem length, angle and/or headset to have Frame Comparison calculate the BarX and Y for you.
The Headset height/spacers value includes the height of the headset top cover (for integrated headsets). The possible heights range from 3mm (the lowest headset cover we know of) to 45mm (the maximum recommended for most forks). If you wish to perform the calculation for a frame that utilises an external headset you will need to know the stack of the chosen headset (usually around 30mm) and use that as a minimum value.
Bar XY gets you from the Bottom Bearing to the handlebar clamp. But, hopefully you're not steering by holding on to the handlebar clamp!
With Frame Comparison, you can choose a handlebar make & model (and optionally width), and it will calculates a Hood position for you, for a more accurate measure of where your hands will be positioned on the bike. Note that the Hoods position will not be completely accurate - because our models don't allow for every variation in bar geometry, and because you may be angling the bar.
For more information on this feature, see: Frame Comparison - Bar Curve X and Bar Top Y for Road Bikes
If you're looking for some input on your frame selection, why not share the results of your Frame Comparison on one of the many cycling forums? Or maybe you're a fit pro & want to respond to someone's question about which frame they should be buying. After selecting your frame, stem & bar options in Frame Comparison, just copy the URL from your browser's address bar. It contains all of the selections you've made on the Frame Comparison page, so anyone clicking the link will arrive at the same details as you.
We hope you enjoy using Frame Comparison tool. If you have any questions about it, please get in touch with us using the chat system (link is at the bottom right of our site.)
If we don't have the information for a brand that you want to use in the system it's probably because we found it difficult to source that data. It would be helpful if you could contact the Manufacturer as well as our team to express your interest in having the data in our system.
Please note that the images and information provided by the site are based on what we have sourced from the Manufacturers website. We have taken all care in collecting the data but we take no responsibility for incorrect data that has been provided by the Manufacturer, or images that do not reflect the configuration of a particular model.